(800) 404-2311
PHS Lift — Authorized Noblelift Dealer

Free Interactive Tool · BATTERY SIZING

Floor Scrubber Battery Runtime Calculator

Right-size the battery to your tank, brush, and shift length.

No sign-upInstant resultsReal Noblelift inventory

Inputs

floor scrubber

Lithium tolerates 80% depth-of-discharge; lead-acid 50%.

Typical: 75–250 Ah depending on tank size and brush type.

Typical: 10–35 A — varies with brush pressure, vacuum, and travel speed.

60%

% of shift the floor scrubber is actively drawing current. Dedicated: 60–70%. Shared: 25–35%.

Results

Runtime per charge

4.4hours

Based on 53 Ah usable (50% DOD) ÷ 12 A effective draw

Recommended capacity

Single 8-hr shift192 Ah
Two 8-hr shifts384 Ah
For two-shift operation, lead-acid requires a second battery + swap station. Consider upgrading to lithium with opportunity charging.
Shop Floor Scrubbers →Shop Ride-On Models

About this tool

Battery sizing is the difference between one battery per truck (opportunity-charged lithium) and three batteries per truck (lead-acid with overnight swap stations). Enter your truck's average amp draw, battery capacity in amp-hours, usable discharge depth, and daily shift length — the calculator returns expected runtime, recommended battery pack size for single-shift and multi-shift operation, and a lithium-vs-lead-acid comparison that factors in opportunity charging windows. Most 5,000 lb Class I electric trucks run 5.5-8 hours per lead-acid charge and 8-10 hours per lithium charge.

Shop related equipment

Forklifts
Pallet Jacks
Narrow Aisle

Frequently asked questions

Lead-acid vs lithium — which runs longer?
Neither, in terms of instantaneous runtime — a 48V 600Ah lead-acid and a 48V 500Ah lithium deliver similar peak current. But lithium tolerates deeper discharge (80% vs 50% for lead-acid) and supports opportunity charging, so effective daily runtime on lithium is typically 2× lead-acid in multi-shift operations.
What's duty cycle?
Percentage of the shift the truck is actively drawing current. A dedicated single-job truck might be 60-70% duty cycle; a shared truck at a picking station might be 25-35%. Lower duty cycle = longer runtime per charge.
Why 80% DOD for lithium?
LiFePO4 (lithium iron phosphate) chemistry tolerates 80% depth-of-discharge 3,000+ times. Lead-acid batteries deeply discharged past 50% shed plate material and lose capacity after only 300-500 cycles.
Do I need a battery room for lithium?
No. Lithium batteries don't off-gas hydrogen and don't require ventilation or acid-resistant flooring. Chargers can sit on the warehouse floor next to the truck. This saves 200-400 sq ft of battery room space.
What happens if I undersize the battery?
You'll run out mid-shift. Then either swap a spare (requires battery room + OSHA-certified forklift battery change cert) or do a 15-min opportunity charge on lithium. Chronic undersizing kills lead-acid cells — once a cell drops below 1.75V, it's permanently damaged.

More interactive tools

Capacity Calculator

Load center derating in 15 seconds.

Forklift Class Finder

OSHA Class I–VII in four questions.

Financing Calculator

Monthly payment on approved commercial credit.

Rather just talk to a specialist?

Our team handles sizing, freight, financing, and OSHA questions every day. Get a quote with matched Noblelift inventory in one business day.

Request a Quote → (800) 404-2311